Vertical agitators designed for wastewater treatment processes and a wide range of industrial applications.
The GreenLine range includes fast and slow agitators all available with very fast turnaround times and an excellent benefit-cost ratio.
75 different models, which combine different types of motors, gearboxes, shafts and various types of impeller to ensure perfect performance for each application.
GreenLine Agitators are available in different construction materials, depending on the product to be mixed and the environmental conditions:
> Carbon steel;
> AISI304 steel;
> AISI316L steel;
> Polypropylene;
> Abcite®;
> PVC;
> ECTFE Halar®;
> PTFE;
> Teflon™;
> Ebonite®.
GreenLine is entirely managed by our special selection software, A.P.P.L.E., available online.
The BlueLine product range consists of standard vertical agitators, very popular among customers who need to keep large volumes of liquid in motion with a single agitator in water treatment applications.
A key feature of BlueLine agitators is the possibility of having large dimensions:
> Seamless pipe shaft up to 6 metres;
> Impeller diameter up to 4 metres;
> Motor power up to 45 kW.
1477 different models of agitators, divided into 9 families according to the work to be performed, combine different construction features in order to always guarantee top performance.
The materials used for the BlueLine agitators are selected according to the liquid to be stirred:
> Carbon steel;
> AISI304 steel;
> AISI316L steel;
> Polypropylene;
> Abcite®;
> PVC;
> ECTFE Halar®;
> PTFE;
> Teflon™;
> Ebonite®.
BlueLine agitators are configurable through our special selection software, A.P.P.L.E.
The SilverLine agitators have been specially designed for use in processes that require the preparation and storage of:
> Slurry
> Slip
> Cement grout
> Ceramic glaze
And much more.
Thanks to our technical expertise as well as an in-depth knowledge of mechanics and fluid-dynamics, we have developed a complete range of impellers – made with stainless steel or other high-quality materials – in order to fulfil every mixing process.
Flocculant mixing system with two-blade impeller. Thanks to its high hydrodynamic profile with wide blade surface, has the highest flow rate at the lowest peripheral speed. This design is aimed to prevent the fluid coming out from one blade to immediately meet the second blade.
Therefore, it is perfect when managing very delicate applications, where the fluid needs to be handled very gently and carefully. That is why Premium is specific for flocculation.
It can be manufactured with different diameters, 800 to 3000 mm.
A completely disassemblable option is available as well, to ease the entering through the tank manhole.
Three-blade impeller with high hydrodynamic profile. Within our industrial impeller models, it has the lowest torque for the same flow rate. Moreover, it can create the highest flow rate with the lowest peripheral speed.
It is perfect as flow-maker, for high head values in recirculation.
It can be manufactured with different diameters, 200 to 3500 mm.
A completely disassemblable option is available as well, to ease the entering through the tank manhole.
High-efficiency three-blade impeller with high hydrodynamic profile. Thanks to its high flow rate, it is particularly suitable for flash mixing, sludge and solid suspension, equalization, etc.
It can be manufactured with different diameters, 900 to 1500 mm.
A completely disassemblable option is available as well, to ease the entering through the tank manhole.
Three-blade impeller with high hydrodynamic profile. It is the “evolution” of Hurricane. Its internal velocity gradient, constant from the centre to the edge of the blade, allows the positioning of an impeller with large diameter very close to the bottom of the tank. That makes Evolution perfect for applications that require the mixer’s continuous operation during the total draw-off of the tank.
It can be manufactured with different diameters, 1650 to 3500 mm.
A completely disassemblable option is available as well, to ease the entering through the tank manhole.
Three-blade impeller with high hydrodynamic profile. Due to its special design, it can produce a centrifugal effect for which the impeller can be defined self-cleaning, thanks to this anti-clogging effect.
It is specific for nitrification/denitrification, anaerobic digestion, mixing in anoxic systems and other applications with presence of fibres.
It can be manufactured with different diameters, 1600 to 3500 mm.
A completely disassemblable option is available as well, to ease the entering through the tank manhole.
It is widely used in a broad range of applications due to its efficiency and cost-effectiveness. Within Water Treatment, pitched blade impellers are perfect for polyelectrolyte preparation and maturation, primary neutralization and pH adjustment.
It can be manufactured with different diameters, 200 to 2000 mm.
A completely disassemblable option is available as well, to ease the entering through the tank manhole.
This helical type impeller is very versatile, generally installed in fast direct mixers. Very common in small preparations of chemicals.
It is manufactured from casting in proprietary moulds.
It can be manufactured with different diameters, 90 to 160 mm diameter.
Available in 2 material options, polypropylene (PP) and stainless steel (SS 316L).
Perfect when dealing with high viscosities, cowles agitators are typically used in paints or detergents industry. Their design, combined with the high shear, allow the product dispersion and foster a quick dissolution.
They can be manufactured with different diameters, 75 to 750 mm.
Different joint options are available.
Generally used within food & beverage and cosmetics industry to manage high viscosity products or to foster heat exchange.
It is common within the pharmaceutical industry as well, in processes such as crystallization.
Moreover, it is often used as universal rotor in small tanks for multi-stage applications.
The engineering and the manufacturing of this anchor type impeller are directly related to the tank features.
Plastic mixing impeller generally used within food farming industry, for fertilization and irrigation.
It is only available 130 mm diameter.
Manufactured with white polyethylene (PE).
